Research

Stereolithography (SLA) 3D printing of an antihypertensive polyprintlet: Case study of an unexpected photopolymer-drug reaction.

Xu X, Robles-Martinez P, Madla CM, Joubert F, Goyanes A, Basit AW, Gaisford S / Addit. Manuf.(2020) DOI: 10.1016/j.addma.2020.101071

Non-destructive dose verification of two drugs within 3D printed polyprintlets.

Trenfield SJ, Tan HX, Goyanes A, Wilsdon D, Rowland M, Gaisford S, Basit AW / Int. J. Pharm.(2020) DOI: 10.1016/j.ijpharm.2020.119066

3D Printed Tablets (Printlets) with Braille and Moon Patterns for Visually Impaired Patients.

Awad A, Yao A, Trenfield SJ, Goyanes A, Gaisford S, Basit AW / Pharmaceutics.(2020) DOI: 10.3390/pharmaceutics12020172

Selective Laser Sintering 3D Printing of Orally Disintegrating Printlets Containing Ondansetron.

Allahham N, Fina F, Marcuta C, Kraschew L, Mohr W, Gaisford S, Basit AW, Goyanes A / Pharmaceutics.(2020) DOI: 10.3390/pharmaceutics12020110

3D printed opioid medicines with alcohol-resistant and abuse-deterrent properties.

Ong JJ, Awad A, Martorana A, Gaisford S, Stoyanov E, Basit AW, Goyanes A / Int. J. Pharm.(2020) DOI: 10.1016/j.ijpharm.2020.119169

3D printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method.

Robles-Martinez P, Xu X, Trenfield SJ, Awad A, Goyanes A, Telford R, Basit AW / Pharmaceutics.(2019) DOI: 10.3390/pharmaceutics11060274

Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process.

Goyanes A, Allahham N, Trenfield SJ, Stoyanov E, Gaisford S, Basit AW / Int. J. Pharm.(2019) DOI: 10.1016/j.ijpharm.2019.118471

3D Printed Pellets (Miniprintlets): A Novel, Multi-Drug, Controlled Release Platform Technology.

Awad A, Fina F, Trenfield SJ, Patel P, Goyanes A, Gaisford S, Basit AW / Pharmaceutics.(2019) DOI: 10.3390/pharmaceutics11040148

Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients.

Goyanes A, Madla CM, Umerji A, Duran-Pineiro G, Giraldez-Montero JM, Lamas-Diaz MJ, Gonzalez-Barcia M, Taherali F, Sanchez-Pintos P, Couce ML, Gaisford S, Basit AW / Int. J. Pharm.(2019) DOI: 10.1016/j.ijpharm.2019.118497

Track-and-trace: Novel anti-counterfeit measures for 3D printed personalized drug products using smart material inks.

Trenfield SJ, Xian Tan H, Awad A, Buanz A, Gaisford S, Basit AW, Goyanes A / Int. J. Pharm.(2019) DOI: 10.1016/j.ijpharm.2019.06.034

Shaping the future: recent advances of 3D printing in drug delivery and healthcare.

Trenfield SJ, Awad A, Madla CM, Hatton GB, Firth J, Goyanes A, Gaisford S, Basit AW / Expert Opin. Drug Del.(2019) DOI: 10.1080/17425247.2019.1660318

A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics.

Vithani K, Goyanes A, Jannin V, Basit AW, Gaisford S, Boyd B / Pharm. Res.(2019) DOI: 10.1007/s11095-019-2639-y

Hydroxypropyl-β-cyclodextrin-based fast dissolving carbamazepine printlets prepared by semisolid extrusion 3D printing.

Conceição J, Farto-Vaamonde X, Goyanes A, Adeoye O, Concheiro A, Cabral-Marques H, Sousa Lobo JM, Alvarez-Lorenzo C / Carbohydr. Polym.(2019) DOI: 10.1016/j.carbpol.2019.05.084

An Overview of 3D Printing Technologies for Soft Materials and Potential Opportunities for Lipid-based Drug Delivery Systems.

Vithani K, Goyanes A, Jannin V, Basit AW, Gaisford S, Boyd B / Pharm. Res.(2019) DOI: 10.1007/s11095-018-2531-1

3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach.

Trenfield SJ, Goyanes A, Telford R, Wilsdon D, Rowland M, Gaisford S, Basit AW / Int. J. Pharm.(2018) DOI: 10.1016/j.ijpharm.2018.08.002

3D printed medicines: A new branch of digital healthcare.

Awad A, Trenfield SJ, Gaisford S, Basit AW / Int. J. Pharm.(2018) DOI: 10.1016/j.ijpharm.2018.07.024

Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets.

Martinez PR, Goyanes A, Basit AW, Gaisford S / AAPS PharmSciTech.(2018) DOI: 10.1208/s12249-018-1075-3

Reshaping drug development using 3D printing.

Awad A, Trenfield SJ, Goyanes A, Gaisford S, Basit AW. / Drug Discov Today.(2018) DOI: 10.1016/j.drudis.2018.05.025

3D printing of drug-loaded gyroid lattices using selective laser sintering.

Fina F, Goyanes A, Madla CM, Awad A, Trenfield SJ, Kuek JM, Patel P, Gaisford S, Basit AW / Int. J. Pharm.(2018) DOI: 10.1016/j.ijpharm.2018.05.044

Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs.

Kollamaram G, Croker DM, Walker GM, Goyanes A, Basit AW, Gaisford S / Int. J. Pharm.(2018) DOI: 10.1016/j.ijpharm.2018.04.055

3D Printing Pharmaceuticals: Drug Development to Frontline Care.

Trenfield SJ, Awad A, Goyanes A, Gaisford S, Basit AW / Trends Pharmacol. Sci.(2018) DOI: 10.1016/j.tips.2018.02.006

Fabricating 3D printed orally disintegrating printlets using selective laser sintering.

Fina F, Madla CM, Goyanes A, Zhang J, Gaisford S, Basit AW / Int. J. Pharm.(2018) DOI: 10.1016/j.ijpharm.2018.02.015

PET/CT imaging of 3D printed devices in the gastrointestinal tract of rodents.

Goyanes A, Fernández-Ferreiro A, Majeed A, Gomez-Lado N, Awad A, Luaces-Rodríguez A, Gaisford S, Aguiar P, Basit AW / Int. J. Pharm.(2018) DOI: 10.1016/j.ijpharm.2017.11.055

Fabrication of drug-loaded hydrogels with stereolithographic 3D printing.

Martinez PR, Goyanes A, Basit AW, Gaisford S / Int. J. Pharm.(2017) DOI: 10.1016/j.ijpharm.2017.09.003

Patient acceptability of 3D printed medicines.

Goyanes A, Scarpa M, Kamlow M, Gaisford S, Basit AW, Orlu M / Int. J. Pharm.(2017) DOI: 10.1016/j.ijpharm.2017.07.064

Selective laser sintering (SLS) 3D printing of medicines.

Fina F, Goyanes A, Gaisford S, Basit AW / Int. J. Pharm.(2017) DOI: 10.1016/j.ijpharm.2017.06.082

3D printed tablets loaded with polymeric nanocapsules: An innovative approach to produce customized drug delivery systems.

Beck RCR, Chaves PS, Goyanes A, Vukosavljevic B, Buanz A, Windbergs M, Basit AW, Gaisford S / Int. J. Pharm.(2017) DOI: 10.1016/j.ijpharm.2017.05.074

Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing.

Goyanes A, Fina F, Martorana A, Sedough D, Gaisford S, Basit AW / Int. J. Pharm.(2017) DOI: 10.1016/j.ijpharm.2017.05.021

Patient-Specific 3D Scanned and 3D Printed Antimicrobial Polycaprolactone Wound Dressings.

Hassan ZM, Goyanes A, Clark V, Basit AW, Hilton ST, Gaisford S / Int. J. Pharm.(2017) DOI: 10.1016/j.ijpharm.2017.04.077

Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets.

Goyanes A, Kobayashi M, Martínez-Pacheco R, Gaisford S, Basit AW / Int. J. Pharm.(2016) DOI: 10.1016/j.ijpharm.2016.06.021

3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems.

Goyanes A, Det-Amornrat U, Wang J, Basit AW, Gaisford S / J. Control. Release.(2016) DOI: 10.1016/j.jconrel.2016.05.034

Stereolithographic (SLA) 3D printing of oral modified-release dosage forms.

Wang J, Goyanes A, Gaisford S, Basit AW / Int. J. Pharm.(2016) DOI: 10.1016/j.ijpharm.2016.03.016

Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing.

Goyanes A, Chang H, Sedough D, Hatton GB, Wang J, Buanz A, Gaisford S, Basit AW / Int. J. Pharm.(2015) DOI: 10.1016/j.ijpharm.2015.10.039

3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics.

Goyanes A, Wang J, Buanz A, Martínez-Pacheco R, Telford R, Gaisford S, Basit AW / Mol. Pharm.(2015) DOI: 10.1021/acs.molpharmaceut.5b00510

Effect of geometry on drug release from 3D printed tablets.

Goyanes A, Robles-Martinez P, Buanz ABM, Basit AW, Gaisford S / Int. J. Pharm.(2015) DOI: 10.1016/j.ijpharm.2015.04.069

3D printing of modified-release aminosalicylate (4-ASA and 5-ASA).

Goyanes A, Buanz ABM, Hatton GB, Gaisford S, Basit AW / Eur. J. Pharm. Biopharm.(2015) DOI: 10.1016/j.ejpb.2014.12.003

Fused-filament 3D printing (3DP) for fabrication of tablets.

Goyanes A, Buanz ABM, Basit AW, Gaisford S / Int. J. Pharm.(2014) DOI: 10.1016/j.ijpharm.2014.09.044